- SONY UPDATE M24.R.0215 HOW TO
- SONY UPDATE M24.R.0215 UPGRADE
- SONY UPDATE M24.R.0215 SOFTWARE
- SONY UPDATE M24.R.0215 DOWNLOAD
WARNING!! Do not operate or power off the system until this message is displayed. Then, the system is turned off automatically.
SONY UPDATE M24.R.0215 UPGRADE
The firmware upgrade is complete when "DONE" appears on the front panel display. While the upgrade is installed the message "UPDATE" is displayed on the front panel display. The message, is displayed on the television. At the Xcross Media Bar™ menu, use the arrow keys on the Remote Control to select “Setup” – “Software Update” and the press the ENTER button. Insert USB that contain the 4 image files. Otherwise, the firmware upgrade may not succeed. Note: If the "Quick Start Mode" is set to "On", change the setting to "Off". Use the arrow keys to select "Quick Start Mode" and make sure that the "Quick Start Mode" is set to "Off". At the Xross Media Bar™ menu, use the arrow keys on the Remote Control to select "Setup”- "System Settings", and then press the ENTER button. Note: The firmware upgrade process takes a minimum of 10 minutes. Doing so may damage the system to the point of requiring repair. WARNING!! Do not press any buttons, except as instructed, until the upgrade is complete. 
Firmware upgrade InstructionsWARNING!! Do not power off the system or disconnect it from the AC power outlet.
SONY UPDATE M24.R.0215 HOW TO
The instructions below are for how to install the firmware upgrade using USB Memory. Save the decompressed files (4 files) to the root directory of USB, the folder name should be “UPDATE”.The extracted files will be named "MSB23-FW.BIN”,“MSB23-FW.ID”, " MSB23-FW_MB.BIN” and “MSB23-FW_MB.ID”.Double-click the UPDATA_M23R0221.zip file.
SONY UPDATE M24.R.0215 DOWNLOAD
If the file size is different than the "109,616,625 bytes", please download the UPDATA_M23R0221.zip file again.Note: The "Size on disk:" listed may be different. On the "UPDATA_M23R0221.zip Properties" screen, verify that the "Size:" listed is "104 MB (109,616,625 bytes)".Right-click the UPDATA_M23R0221.zip file, and click "Properties".Go to the directory where the file was downloaded and verify that the size of the UPDATA_M23R0221.zip file is 109,616,625 bytes.Download the UPDATA_M23R0221.zip file to a temporary or download directory (please note this directory for reference).Download and save into USB memory Instructions You'll download the update to your computer, transfer it to a USB memory device, then transfer it to your HT-IV300. It is highly recommended that you print out these instructions for use as a reference during the installation process.In order to perform the firmware upgrade, it is necessary to have the system correctly connected to a compatible television.Recommended operating system for the computer that will download the firmware upgrade: Windows® 10, Windows® 8.1, Windows® 8, Windows® 7 is recommended.
Loss of power during the installation of the firmware upgrade may cause the Home Theatre System to be unresponsive or to require repair.
WARNING!! Do not power off the Home Theatre System or disconnect it from the AC power outlet. Failure to follow the instructions may interrupt the upgrade process and may cause the Home Theatre System to be unresponsive or to require repair. WARNING!! Please follow the upgrade instructions carefully. If you have not done so already, please check the current firmware version to determine if this firmware upgrade is needed for your Home Theatre System. SONY UPDATE M24.R.0215 SOFTWARE
Software Version M23.R.0221 - if the version number is M23.R.0221 or higher, you already have the most recent firmware version. The firmware version currently installed on the Home Theatre System will be listed on the television screen. Use the arrow keys to select "System Information", and then press the ENTER button. Use the arrow keys on the Remote Control to select "Setup" – "System Settings", and then press the ENTER button. Press the "HOME" button and wait until the Xross Media Bar™ menu is displayed on the television before proceeding. 
Power on the television and make sure it is tuned to the inputs to which the Home Theatre System is connected. If you're not sure, it's easy to check which version of firmware you have: If the version number is M23.R.0221 or higher, you do not need to update.
0 kommentar(er)
